Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Are there any DIY videos about the Toyota Highlander?

Model: Toyota Highlander Xu50 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

In response to the question above, here is a video showing how to proceed, do it yourself, to replace the front headlight bulbs. In reality, there is not much difference from other cars, in fact we will find correspondence as we continue in the description of the work.

First, we open the hood by pulling the lever located under the steering wheel, on the left, then we release the rear metal clip of the headlight assembly, remove the bulb from its socket, disconnect the power cable connector, and finally install the new bulb and test its ignition.


Posted on 26 October 2025 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on a 2019 Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) Follow these simple steps to manually reset the maintenance light on your 2019 Toyota Highlander. First, enter the cabin and locate the "Trip/Reset" …
How to Reset the Tyre Light on a 2016 Toyota Highlander
How to Reset the Tyre Light on a 2016 Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) If you own a 2016 Toyota Highlander and want to know how to manually reset the tyre light, simply follow the steps described below and put them into …
How to Disable the Traction Control on the Toyota Highlander?
How to Disable the Traction Control on the Toyota Highlander?
Toyota Highlander (2008-2013 / Xu40) To disable the traction control on the Toyota Highlander, turn the ignition key to power up the instrument cluster. Once the cluster is on, locate th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos