Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Highlander
    4. : To reset the maintenance light on the 2019 Toyota Highlander.

Toyota Highlander - Video tutorial

Model: Toyota Highlander Xu50 - Years 2014-2019
Part: Instrument cluster
Operation: To reset the maintenance light on the 2019 Toyota Highlander.

The steps to independently perform a manual reset of the maintenance light on your 2019 Toyota Highlander are few and simple, and we will discover them together below. First of all, enter the cabin and locate the "Trip/Reset" button, then press and hold it while simultaneously turning on the instrument panel. Wait a few seconds, and as soon as the light stops flashing, release the button, and the procedure is successfully completed. All that remains is to start the engine and set off or turn off the instrument panel.


Posted on 8 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Toyota Highlander 2014-2019 - What does the red VSC light on the Toyota Highlander mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos