Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on the Toyota Highlander Xu40

Model: Toyota Highlander Xu40 - Years 2008-2013
Part: Headlight bulb

Today, we will see the procedure necessary for removing and replacing the dipped beam bulb of the front headlight on the Toyota Highlander Xu40 in simple and quick steps. First, open the bonnet and remove the rubber protective cap of the bulb; then disconnect the electrical connector of the lamp and unclip the metal spring, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type (in this case, H4); simply insert it correctly and reassemble everything!

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Toyota Highlander
How to Replace the Front Headlight Bulb on a Toyota Highlander
Toyota Highlander (2008-2013 / Xu40) To replace the front headlight bulb on a Toyota Highlander, open the bonnet to access the rear of the corresponding headlight. Here, you will find th…
How to Replace the Rear Light Bulb of the Toyota Highlander?
How to Replace the Rear Light Bulb of the Toyota Highlander?
Toyota Highlander (2008-2013 / Xu40) To replace the rear light bulb of the Toyota Highlander, open the boot lid and remove the side panel corresponding to the bulb that needs replacing. …
Replacing the cabin air filter on the Toyota Highlander Xu40
Replacing the cabin air filter on the Toyota Highlander Xu40
Toyota Highlander (2008-2013 / Xu40) Today we will see, in this video tutorial, how to remove and replace the cabin air filter on the Toyota Highlander Xu40. First, open the front passen…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos