Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulbs on a Toyota Highlander?

Model: Toyota Highlander Xu40 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

Replacing the front headlight bulbs on a Toyota Highlander is a very simple and quick operation; see how to proceed in this tutorial. First, ensure the key is not in the ignition, then open the bonnet, disconnect the power connector, and remove the rubber cover around it. Next, pull out the old bulb by unlocking the metal clip and fit the replacement by following the reverse procedure.

Avoid touching the new bulb directly with bare hands, as any residues can cause it to overheat.


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to replace the rear lamp bulbs on a Toyota Highlander
How to replace the rear lamp bulbs on a Toyota Highlander
Toyota Highlander (2001-2007 / Xu20) Through these brief and simple instructions, you will see how to remove and replace the bulbs in the rear lamp of a Toyota Highlander. First, open th…
How to Replace the Rear Headlamp Bulbs on a Toyota Highlander?
How to Replace the Rear Headlamp Bulbs on a Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) Replacing the rear headlamp bulbs on the Toyota Highlander is a straightforward task. Start by opening the tailgate and removing the plastic panel us…
How to Replace the Front Headlight of the Toyota Highlander
How to Replace the Front Headlight of the Toyota Highlander
Toyota Highlander (2008-2013 / Xu40) In this tutorial video, you will see how to remove the front headlight of the first generation Toyota Highlander. Open the bonnet and disconnect all …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos