Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wipers on a Toyota Corolla

Model: Toyota Corolla MK 5, E210 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Windshield wipers

See other generations:
Video tutorial

This video will show you how to replace the wipers on a Toyota Corolla. Lift the wiper arm and, using a spanner or screwdriver, lift the lever that holds it in place; slightly lower the piece and remove it. Now, you need to pull out the rubber part from the side where the support is thickest, as shown at 0:20. Then, remove the metal support starting from the edges, as shown at 0:45. Replace it by inserting it into the designated slot and pressing along its length to ensure it adheres correctly.

Now you can reinsert the piece into the plastic support and reinstall everything on the car.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to replace the wiper blades of the Toyota Corolla?
How to replace the wiper blades of the Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) To replace the wiper blades of the Toyota Corolla, lift the arms so that the blades are not in contact with the windscreen. This will allow you to lo…
How to Replace the Wiper Motor on a Toyota Corolla
How to Replace the Wiper Motor on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) To replace the wiper motor on a Toyota Corolla, loosen the central nuts that secure the wipers to their housing. Once the nuts are loosened, complete…
How to Replace the Wiper Blades on a Toyota Corolla?
How to Replace the Wiper Blades on a Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) To replace the wiper blades on a Toyota Corolla, position the wiper arms vertically to access the blades. Once lifted, tilt the blades away from the …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos