Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Motor on a Toyota Corolla

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield wipers

See other generations:
Video tutorial

To replace the wiper motor on a Toyota Corolla, loosen the central nuts that secure the wipers to their housing. Once the nuts are loosened, completely remove the wiper blades and detach the trim at the base of the windscreen.

This will provide access to the motor, which can be removed by unscrewing the screws and disconnecting the power cables. Now, insert the new replacement part, securing it properly and connecting the connectors.


Updated on 7 October 2026 by ScegliAuto


Related tutorials

How to replace the wiper blades of the Toyota Corolla?
How to replace the wiper blades of the Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) To replace the wiper blades of the Toyota Corolla, lift the arms so that the blades are not in contact with the windscreen. This will allow you to lo…
Where are the Fuses on a Toyota Corolla?
Where are the Fuses on a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) On the Toyota Corolla, each fuse is located inside one of the dedicated fuse boxes installed in the vehicle: this type of car will have two boxes for…
Where Are the Fuses Located on the Toyota Corolla?
Where Are the Fuses Located on the Toyota Corolla?
Toyota Corolla (2013-2019 / E160, E170, MK 4) The fuse boxes of the Toyota Corolla serve to contain the fuses that manage the operation of devices installed on the vehicle: in this type of car, y…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos