Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Plastic A-Pillars of the Toyota Corolla

Model: Toyota Corolla MK 5, E210 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the internal plastic A-pillars of the Toyota Corolla by following the instructions below. First, get inside the vehicle and start by detaching the upper part of the plastic A-pillars using a thin plastic trim tool; remove the side seal and then disconnect the airbag electrical connectors located at the back, as shown in the video.

At this point, perform the same operation to remove the other A-pillars; all that’s left is to refit everything by applying the reverse procedure!


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to Change the Front Headlight on the Toyota Corolla
How to Change the Front Headlight on the Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Today, in this video tutorial, you will learn how to remove and replace the front headlight on the Toyota Corolla in simple and quick steps. First, o…
Headlight Bulb Replacement for Toyota Corolla
Headlight Bulb Replacement for Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Are the headlight bulbs damaged? Let’s look at removing the front headlight bulbs from a Corolla. Lift the front bonnet of the car and secure it. Rem…
Removing the Front Seats on the Toyota Corolla (2018)
Removing the Front Seats on the Toyota Corolla (2018)
Toyota Corolla (2013-2019 / E160, E170, MK 4) This video shows how to remove the front seats on the 2018 Toyota Corolla in simple steps. First, open the bonnet and disconnect the battery; then, o…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos