Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Boot Light Bulb on a Toyota Yaris

Model: Toyota Yaris MK 4 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Light bulb

See other generations:
Video tutorial

To replace the boot light bulb on the Toyota Yaris, simply remove the complete light unit with the bulb holder: insert the tip of a small flathead screwdriver into the side of the light unit and lever it out of its housing; at this point, by rotating, you can access the bulb holder and remove the original bulb, which is a glass type with a T10 fitting; then insert the new bulb, choosing an LED type that will provide a much more efficient level of illumination; reattach the bulb holder to the light unit and refit it into the boot lining.


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Toyota Yaris
How to Replace the Rear Light Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Before you can start, open the boot lid of your Toyota Yaris. Begin by unfastening and removing the side cover inside the boot by simply releasing th…
Replacing the Rear Light on a Toyota Yaris
Replacing the Rear Light on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Is the rear light on your Toyota Yaris due for replacement? Here’s how to remove it from the car. Open the boot lid, then remove the plastic cover lo…
Number Plate Bulb Replacement on Toyota Yaris Verso
Number Plate Bulb Replacement on Toyota Yaris Verso
Toyota Yaris (1999-2005 / Xp10) In this video tutorial, you will learn how to remove and replace the number plate bulbs on a Toyota Yaris Verso, as well as on other models from the …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos