Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Number Plate Bulb Replacement on Toyota Yaris Verso

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: License plate light

In this video tutorial, you will learn how to remove and replace the number plate bulbs on a Toyota Yaris Verso, as well as on other models from the manufacturer. First, open the boot and remove the tailgate panel by disengaging it from the rear clips: then access the bulb holder located at the back. Now disconnect the electrical connector and use pliers to remove the bulb holder along with the bulb, as shown in the video; pull it out and replace it with the new one of the correct type. All that’s left is to reassemble everything!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Light on a Toyota Yaris
How to Replace the Number Plate Light on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) This brief video tutorial shows the necessary steps to replace the number plate light on a first-generation Toyota Yaris, produced from 1999 to 2005.…
How to Remove the Rear Light on the Toyota Yaris Verso
How to Remove the Rear Light on the Toyota Yaris Verso
Toyota Yaris (1999-2005 / Xp10) In today's video, you will see the steps to remove and replace the rear light on the first series Toyota Yaris Verso. First, open the tailgate of the…
How to replace the diesel filter on the Toyota Yaris Verso?
How to replace the diesel filter on the Toyota Yaris Verso?
Toyota Yaris (1999-2005 / Xp10) To replace the diesel filter on the Toyota Yaris Verso, you need to completely remove the rear seat bench to gain access to the components underneath…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos