Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Camry
  6. : How to reset the Toyota Camry ECU?

Toyota Camry - Video tutorial

Model: Toyota Camry Xv40 - Years 2006-2013
Part: Control unit
Operation: How to reset the Toyota Camry ECU?

In order to reset the Toyota Camry ECU you need to open the hood so that you can have access to the components inside the engine compartment. In correspondence with the left front headlight, you will find the battery that must be disconnected for a rather long period of time, so that the control unit resets itself. Subsequently, it will be necessary to connect the battery again and go inside the passenger compartment, turning on the instrument panel. In this way it will be possible to verify that all the settings and errors stored in the control unit have been reset.


Posted on 17 April 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos