Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Camry
    4. : Where is the fuse box located in the 1998 Toyota Camry?

Toyota Camry - Video tutorial

Model: Toyota Camry Xv20 - Years 1997-2001
Part: Fuse box
Operation: Where is the fuse box located in the 1998 Toyota Camry?

To find the box that contains all the various fuses for your 1998 Toyota Camry, it only takes a few seconds. All you have to do is read the following guide carefully and follow the few simple steps described. First, you need to get inside the car and reach the driver's seat, then make sure your Toyota Camry is completely turned off and locate the small compartment on the lower left side of the dashboard. Once you locate it, remove the protective plastic and find the fuses you were looking for.


Posted on 13 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Camry 2006-2013 - Where is the Toyota Camry cigarette lighter fuse located? Read Answer
    • Camry 2011-2019 - Where is the fuse box located in the Toyota Camry? Read Answer
    • Camry 2006-2013 - Where is the Toyota Camry cigarette lighter fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos