Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the Toyota Camry XV40

Model: Toyota Camry Xv40 - Years 2006-2013
Part: Warning light – error code

This guide shows how to reset the maintenance light on the Toyota Camry XV40. The first step is to turn on the ignition without starting the engine. Using the trip reset button, select "TRIP A" and reset that value. At this point, turn off the ignition. While holding the trip reset button, turn the ignition back on; the maintenance light will start to blink, and wait for the maintenance light to disappear. Turn off the ignition to complete the reset procedure.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Light on a 2012 Toyota Camry
Toyota Camry (2006-2013 / Xv40) To properly reset the tire light that stays on in the instrument cluster of your 2012 Toyota Camry, follow these simple steps. First, insert the key …
Where to Find the Fuse Box on the Toyota Camry XV40
Where to Find the Fuse Box on the Toyota Camry XV40
Toyota Camry (2006-2013 / Xv40) If you own a Toyota Camry XV40 (model year 2006-2013) and want to find the fuse box, just follow these steps. First, get inside the vehicle and reach…
Where to Find the Engine Fuse Box of the Toyota Camry XV40
Where to Find the Engine Fuse Box of the Toyota Camry XV40
Toyota Camry (2006-2013 / Xv40) If you have a Toyota Camry XV40 and want to locate the engine fuse box, follow the steps described below. First, lift the hood of your Toyota Camry, …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos