Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : What is the Toyota Aygo fuse scheme?

Toyota Aygo - Video tutorial

Model: Toyota Aygo MK 2, Ab40 - Years 2014-2023
Part: Fuse box
Operation: What is the Toyota Aygo fuse scheme?

In this video we can see the diagrams of the fuse boxes, and their position, in the Toyota Aygo, useful in case we need to check the fuse of a malfunctioning device. As we can see, we find a first box inside the cockpit on the driver's side, located under the dashboard in the left area. We can find the second box inside the engine compartment, also placed on the driver's side. If a fuse needs to be replaced, remember to always use a spare of the same amperage, so as not to cause damage.


Posted on 1 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Aygo 2014-2023 - Where is the fuel pump relay located in the Toyota Aygo? Read Answer
    • Aygo 2014-2023 - Where is the fuse box located in the Toyota Aygo? Read Answer
    • Aygo 2014-2023 - What is the location of the Toyota Aygo fuse box? Read Answer
    • Aygo 2014-2023 - Location of Toyota Aygo fuses? Read Answer
    • Aygo 2014-2023 - Where are the fuses located on Toyota Aygo? Read Answer
    • Aygo 2005-2014 - Where are the Toyota Aygo fuses located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos