Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light of the Toyota Auris

Model: Toyota Auris E150 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Warning light – error code

See other generations:
Video tutorial

If you want to manually reset the maintenance light of your Toyota Auris Mk1 but do not know the necessary steps, then this guide is all you need. You will only need a few simple moves to complete the entire procedure.

First, start with the car completely off. Then insert the key and turn on the ignition only. Locate and press the button to the right of the speedometer until you see the "Trip B" option on the mini display.

At this point, turn off the ignition. Keep the same button pressed and turn the ignition back on. Once the message confirming the reset appears, release the button and you are done.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

Resetting Tyre Pressure on Toyota Auris
Resetting Tyre Pressure on Toyota Auris
Toyota Auris (2007-2012 / E150) How do you reset the tyre warning light on a Toyota Auris? Let's see how to perform the maintenance. Enter the vehicle, turn on the ignition with the…
How to Reset the Service Light on Toyota Auris
How to Reset the Service Light on Toyota Auris
Toyota Auris (2012-2018 / E180) To manually reset the service light on your Toyota Auris, follow the procedure described in this guide. First, get into the car and turn on the ignit…
How to Reset the Tyre Pressure Light on a Toyota Auris
How to Reset the Tyre Pressure Light on a Toyota Auris
Toyota Auris (2012-2018 / E180) In this guide, learn how to reset the tyre pressure warning light on a Toyota Auris. If there are issues with the pressure or if the tyres have been …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos