Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the Toyota Yaris battery

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Battery

If the battery of your Toyota Yaris Mk1 needs to be replaced but you do not know how to carry out this operation independently, do not worry because in this new mini guide you will find all the information you need. First, turn off the car completely. Reach the front hood and raise it completely. Identify the battery and proceed with unscrewing first the negative pole (black) and then the positive one (red). At this point also unscrew the safety screw of the battery and remove the latter. Place the new battery, connect the two poles and tighten the safety screw.


Posted on 10 May 2024 by ScegliAuto



How to replace the key battery of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Let's start by inserting the tip of a slotted screwdriver into the slot on the side of the key of our Toyota Yaris, and then leverage. After that, we
Where is the battery located in the Toyota Yaris Hybrid?
Toyota Yaris (2020-2024 / MK 4) Unlike many Toyota models, the Yaris Hybrid places the battery inside the vehicle. The battery of the Toyota Yaris Hybrid is actually located inside
How to replace the Toyota Yaris 1.5 battery
Toyota Yaris (2011-2019 / Xp130) In today's video tutorial we will see how to disassemble and replace the Toyota Yaris 1.5 engine battery, following the instructions below. First we

    Frequently Asked Questions

    • Yaris 2020-2027 - Where is the Toyota Yaris Hybrid battery located? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos