Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Headlight

See other generations:
Video tutorial

To replace the front headlight, first remove the wheel nearest to the headlight. Then, remove the clips securing the inner wheel arch, followed by the screws securing the front bumper, and detach it from its supports to extract it. Locate the upper fastening screws of the headlight assembly and unscrew them.

Pull the headlight towards you. Proceed to disconnect the rear electrical connectors. Take the new headlight assembly and position it in place of the old one, reconnect the connectors, tighten the headlight fastening screws, reposition the bumper, and tighten the screws again, finishing with the reassembly of the wheel arch and the wheel.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Remove the Headlamp from the Toyota Yaris 2
How to Remove the Headlamp from the Toyota Yaris 2
Toyota Yaris (2005-2011 / Xp90) How do you remove the headlamp from the Toyota Yaris? To remove the front headlamp of the Yaris, you need to take off the front bumper. Use a screwdr…
Removing the Rear Light on a Toyota Yaris
Removing the Rear Light on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video tutorial, you will learn how to remove the rear light of a second-generation Toyota Yaris. First, open the boot lid and remove the side…
How to Replace the Front Headlight in the Toyota Yaris
How to Replace the Front Headlight in the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In today's video, you will learn how to replace the front headlight in the second series Toyota Yaris. First, ensure the engine is cold to avoid burn…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos