Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Alphard Vellfire
    4. : How to replace the Toyota Alphard car stereo?

Toyota Alphard Vellfire - Video tutorial

Model: Toyota Alphard Vellfire MK 3 - Years 2015-2023
Part: Car stereo
Operation: How to replace the Toyota Alphard car stereo?

In order to replace the car radio of the Toyota Alphard you have to unscrew the gear knob located on the final part of the lever: removing the gear knob will allow you to detach the central panel of the dashboard, which surrounds the car radio. Once this has been removed, it will be possible to access the screws below, which must be unscrewed allowing the radio to be extracted from its housing. By disconnecting the connectors in its rear part, it will be possible to connect the new radio to them, fixing it to its housing and covering everything with the relative panel.


Posted on 16 May 2024 by ScegliAuto



Where is the fuse box located in the Toyota Alphard 2?
Toyota Alphard Vellfire (2008-2015 / MK 2) In this new mini guide dedicated to your Toyota Alphard second generation (year 2008-2015), we will discover together where the fuse box is located,
Where is the oil filter located in the Toyota Alphard?
Toyota Alphard Vellfire (2015-2023 / MK 3) In this video, we can see where the oil filter is located in the Toyota Alphard and how to proceed if we need to replace it, which is a very simple o
How to replace the cabin filter in Toyota Alphard?
Toyota Alphard Vellfire (2008-2015 / MK 2) Replacing the cabin filter of the Toyota Alphard is an extremely simple and fast operation, let's see how to proceed in this tutorial. First of all,

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos