Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Alphard Vellfire
    4. : How do you remove the Toyota Alphard front bumper?

Toyota Alphard Vellfire - Video tutorial

Model: Toyota Alphard Vellfire MK 2 - Years 2008-2015
Part: Front bumper
Operation: How do you remove the Toyota Alphard front bumper?

To be able to remove the front bumper of the Toyota Alphard you have to go and open the bonnet, so that you have access to the components inside the engine compartment: in particular, you will have to loosen the screws that fix the front grille of the car, so that this can be completely removed. Once the grille has been detached, it will be necessary to unscrew the screws that fix the bumper itself, from the inside of the wheel arches and from the lower part. By disconnecting the underlying connectors, it will be possible to remove the bumper and replace it with a new spare part, which must be suitably fixed.


Posted on 22 November 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos