Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads of the Toyota Alphard?

Model: Toyota Alphard Vellfire MK 3 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Brake pads

See other generations:
Video tutorial

To replace the front brake pads of the Toyota Alphard, lift the vehicle with a jack so that the corresponding wheel is off the ground. At this point, you can unscrew the bolts that secure the wheel, completely removing it to access the components behind it. Here, you can detach the brake caliper from its rotor by unscrewing the bolts; the old pads can then be pulled out from inside the rotor to be replaced with new ones.

After the replacement, you can also mount the corresponding wheel.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Replace the Serpentine Belt on the Toyota Alphard Vellfire 3.5L
How to Replace the Serpentine Belt on the Toyota Alphard Vellfire 3.5L
Toyota Alphard Vellfire (2015-2023 / MK 3) In this brief guide, follow the main steps to remove and replace the serpentine belt on the Toyota Alphard Vellfire 3.5L. First, lift the vehicle and…
How to Remove the Front Bumper of the Toyota Alphard?
How to Remove the Front Bumper of the Toyota Alphard?
Toyota Alphard Vellfire (2008-2015 / MK 2) To remove the front bumper of the Toyota Alphard, open the hood to access the components inside the engine compartment. First, loosen the screws that…
Guide to Replacing the Timing Belt on the Toyota Alphard 3.0 V6
Guide to Replacing the Timing Belt on the Toyota Alphard 3.0 V6
Toyota Alphard Vellfire (2008-2015 / MK 2) Discover the procedure for removing and replacing the timing belt on the Toyota Alphard 3.0 V6. First, lift the vehicle and start by removing the rig…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos