|
Do it yourself
| |||
| ||||
How to Perform a Service on a Toyota RAV4
Model: Toyota Rav 4
Xa30, MK 3
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
In this video tutorial, you can see how to perform a service on a Toyota RAV4. Specifically, we will look at how to replace the engine oil and oil filter. Lift the bonnet and secure it with the appropriate prop. Before starting the oil change, it is advisable to warm up the engine to thin the oil and facilitate its drainage. Start the car and let it warm up for about 10 minutes until it reaches operating temperature, then turn off the vehicle and begin the maintenance. Lift the car with a lift or hydraulic jack and place safety jack stands; remove the plastic cover that protects the engine from splashes; position a container for the used oil under the vehicle and unscrew the drain plug; wait for all the oil to drain into the container, while it finishes dripping, proceed to unscrew the filter cartridge with a special tool; replace the old filter and fit the new filter with new seals for the filter holder. Next, screw the oil drain plug back in, lower the vehicle, and top up with the specific engine oil (5W 30) for this engine.
Updated on 27 May 2026 by ScegliAuto
Related tutorials
Toyota Rav 4
(2013-2018 /
Xa40, MK 4)
In this very short video tutorial today, we can see how to perform the service reset on a Toyota RAV4, specific model produced from 2016 to 2019. So …
Toyota Rav 4
(2019-2026 /
MK 5, Xa50)
In this tutorial, learn how to reset the service light on a Toyota RAV4, a very simple and quick operation to perform only after completing all sched…
Toyota Rav 4
(2013-2018 /
Xa40, MK 4)
In this tutorial, you will see how to reset the service light on a Toyota RAV4, an extremely simple and quick operation to perform only after complet…
Other guides you may be interested in
|
How to Open the Fuel Flap on a Volkswagen Tiguan?
To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.057
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
