Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace or Customise the Rear Light of a Toyota RAV4

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tail light

See other generations:
Video tutorial

This guide explains how to replace the rear lights of a Toyota RAV4 in case a bulb needs replacing or to install a customised version. Start by opening the boot to access the screws securing the lights.

Remove the two screws, as shown at minute 0:05, and apply slight pressure on the side of the light to pull it out. At this point, you can extract the bulbs for replacement or swap the light for a customised one. Reinsert the bulbs and slide the light back into position.

Complete the operation by reattaching the two screws.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Reflectors on a Toyota RAV 4
How to Replace the Rear Reflectors on a Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To replace the rear reflectors on a Toyota RAV 4, lift the vehicle to access the inside of the rear bumper. There will be two screws securing the ref…
Replacing the Rear Light on the Toyota RAV 4
Replacing the Rear Light on the Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Today we will discover the steps to remove and replace the rear light and its bulbs on the Toyota RAV 4. First, open the rear tailgate and start remo…
How to disassemble the rear light of the Toyota RAV 4
How to disassemble the rear light of the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Today's information will show us how to disassemble and replace the rear taillight and its bulbs of the Toyota RAV 4. First, we open the rear door of…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos