Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light in the Toyota RAV4?

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part:

In this video, see how to reset the low tyre pressure warning light in the Toyota RAV4. This procedure should only be performed after restoring the correct pressures indicated on the label inside the door. To reset, turn on the instrument panel and use the directional buttons to scroll through the display until you reach the settings menu, then select vehicle settings. Now access the "TPWS" section and press and hold the OK button with the cursor on "Set Pressure". Verify that the procedure was successful by turning the instrument panel off and back on.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on the Toyota RAV4
How to Reset the Tyre Warning Light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To manually reset the tyre warning light on your Toyota RAV4 fourth generation (2013-2018), follow these simple steps. First, enter the cabin and tur…
How to Reset the Tyre Pressure Warning Light on a Toyota RAV4
How to Reset the Tyre Pressure Warning Light on a Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In this short and simple guide, you will learn how to reset the tyre pressure warning light (TPMS) on a Toyota RAV4. Initially, when you turn on the …
How to Reset the Tyre Warning Light on the Toyota RAV4
How to Reset the Tyre Warning Light on the Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) If the orange tyre warning light on the instrument panel of your third-generation Toyota RAV4 (2012 model) comes on, it indicates a loss of pressure …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos