Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light in a Toyota RAV4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

In this video tutorial, you can see how to reset the tyre pressure light in a Toyota RAV4 by following a few simple steps: the first thing to do if you see the tyre pressure light on is to go to a tyre specialist to check the pressure of all four tyres.

After restoring the correct tyre pressures, get into the driver's side of the vehicle, turn on the ignition, and press the SET button located under the steering wheel, above the pedals.

Hold the button until you see the light flash, continue holding until the light goes out, then release the button. Turn on the ignition, and you should see that the light remains off. Reset complete.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Toyota RAV4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) The illumination of the tyre pressure light indicates a possible puncture or loss of pressure; let's see how to reset the TPMS light on the Toyota RA…
How to reset the tyre pressure warning light on the Toyota RAV 4?
How to reset the tyre pressure warning light on the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) To reset the tyre pressure warning light on the Toyota RAV 4, first inflate the tyres to the correct pressure value, which is indicated on the sticke…
How to reset the tyre pressure warning light on a Toyota RAV 4?
How to reset the tyre pressure warning light on a Toyota RAV 4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) To reset the tyre pressure warning light on a Toyota RAV 4, first inflate the tyres to the optimal pressure value: this value is indicated on the sti…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos