Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Front Bumper of the Toyota Rav 4 MK3

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Front bumper

See other generations:
Video tutorial

Follow this guide for the main instructions to remove and replace the front bumper of the Toyota Rav 4 third series in simple steps. First, open the bonnet and remove all the plastic clips located at the top of the bumper; once the plastic cover is removed, unscrew the screws found on both sides of the front wheel arches, then remove those located underneath the bumper, as shown in the video.

At this point, gently unclip the bumper from the sides until it is completely removed, following the video to the end!


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Toyota RAV 4
How to Remove the Front Bumper of the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) This guide shows you how to remove and replace the front bumper of the Toyota RAV 4. First, open the bonnet of your car and start unscrewing the scre…
How to Replace the Front Headlights on a Toyota RAV 4 MK3
How to Replace the Front Headlights on a Toyota RAV 4 MK3
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Today, we will go through step-by-step instructions to remove and replace the front headlights on the third generation Toyota RAV 4, following these …
How to Remove the Front Bumper of a Toyota RAV4
How to Remove the Front Bumper of a Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Today’s instructions will show you how to remove and replace the front bumper of a Toyota RAV4 in simple steps. First, open the bonnet and start remo…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos