Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Toyota RAV 4

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Front bumper

See other generations:
Video tutorial

This guide shows you how to remove and replace the front bumper of the Toyota RAV 4. First, open the bonnet of your car and start unscrewing the screws located at the top of the front bumper. Next, remove all the plastic clips found on both sides of the front bumper to detach it, as shown in the video.

At this point, gently unclip the bumper from the sides until it is completely removed; refit the new front bumper by applying the reverse procedure!


Updated on 11 July 2026 by ScegliAuto


Related tutorials

Replace the Front Bumper of the Toyota Rav 4 MK3
Replace the Front Bumper of the Toyota Rav 4 MK3
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Follow this guide for the main instructions to remove and replace the front bumper of the Toyota Rav 4 third series in simple steps. First, open the …
How to Remove the Front Bumper of a Toyota Rav 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Learn how to remove the front bumper of a Toyota Rav 4. Lift the bonnet and secure it with the prop rod; using a plastic or metal lever, remove the s…
How to Remove the Front Bumper of a Toyota Rav 4
How to Remove the Front Bumper of a Toyota Rav 4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Do you want to replace the front bumper of your Toyota Rav4? Follow these steps. Lift the bonnet and secure it. Using a battery-powered screwdriver o…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos