Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of a Toyota Rav 4

Model: Toyota Rav 4 Xa20, MK 2 - Years 2000-2006
Part: Front bumper

Do you want to replace the front bumper of your Toyota Rav4? Follow these steps. Lift the bonnet and secure it. Using a battery-powered screwdriver or a screwdriver, remove the securing pins of the grille located in the centre of the bumper. Once the grille is removed, detach the splash guard pins with a screwdriver, and finally remove the pins around the perimeter of the bumper. Carefully pull the bumper away from the body of the vehicle. To reassemble, position the bumper onto the vehicle body and tighten all screws around the splash guard and the perimeter.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper of the Toyota RAV 4
How to Remove the Front Bumper of the Toyota RAV 4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) This guide shows you how to remove and replace the front bumper of the Toyota RAV 4. First, open the bonnet of your car and start unscrewing the scre…
How to Remove the Front Bumper of a Toyota Rav 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) .. Learn how to remove the front bumper of a Toyota Rav 4. Lift the bonnet and secure it with the prop rod; using.. …
How to remove the front bumper of the Toyota RAV4
How to remove the front bumper of the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Today's instructions will show us how to disassemble and replace the front bumper of the Toyota RAV 4, in simple steps. First, we open the hood of ou…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos