Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter of the Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air filter

See other generations:
Video tutorial

The air filter is one of the most important components in the engine bay as it ensures maximum efficiency and reliability of the engine. After a certain number of miles, it may be necessary to replace it, and it's important to follow a few simple steps.

Ensure the engine is off. Lift the front bonnet and locate the air filter box at the front. Release all the clips around its perimeter.

Do the same with the two clips on the side and underneath the box. At this point, remove the box by lifting it upwards. Directly underneath is the air filter.

Remove it and replace it with the new model. Refit the cover of the box and secure the clips.

Finally, lower the bonnet.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Toyota Aygo 2
How to replace the cabin air filter of the Toyota Aygo 2
Toyota Aygo (2014-2023 / Ab40, MK 2) In the following guide, we will help you complete the replacement of the air filter inside the cabin of your Toyota Aygo second edition. First of all…
How to replace the air filter on a Toyota Aygo?
How to replace the air filter on a Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) To replace the air filter on a Toyota Aygo, open the bonnet to access the components inside the engine bay. Here, loosen the screws securing the cove…
How to replace the air filter in the Toyota Aygo?
How to replace the air filter in the Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) In this tutorial we can see how to replace the air filter in the Toyota Aygo, a very simple and fast operation. First of all, make sure that the engi…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos