Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Highlander
  6. : How can I replace the battery in my Toyota Highlander?

Toyota Highlander - Video tutorial

Model: Toyota Highlander Xu40 - Years 2008-2013
Part: Battery
Operation: How can I replace the battery in my Toyota Highlander?

In this short and simple video we will see how to remove and replace the battery of your Toyota Hghlander Xu50. By following the instructions below, it will be a very fast operation that you can carry out in total autonomy. First of all, we open the bonnet and start by disconnecting and removing both battery terminals (positive and negative pole), using a 10 mm socket wrench; after which we unscrew the screws of the central fixing bracket, using the same wrench. At this point we lift and extract the battery from the battery holder, replacing it with the new one (having the same amperage); we just have to reassemble everything!


Posted on 7 August 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos