Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Sienta
  6. : How do you replace the Toyota Sienta spark plugs?

Toyota Sienta - Video tutorial

Model: Toyota Sienta Npc80 - Years 2003-2015
Part: Spark plugs
Operation: How do you replace the Toyota Sienta spark plugs?

In order to replace the Toyota Sienta spark plugs, you need to open the hood, so that you have access to the components inside the engine compartment: here it will be necessary to remove the plastic cover of the upper part of the engine block, so that you have access to the underlying components. It will be necessary to unscrew the screws that secure the injectors in their seat, disconnecting and extracting them in order to be able to access the spark plugs below: these must be extracted with the relative socket wrench and replaced with new spare parts, re-mounting the injectors and the top engine cover.


Posted on 11 August 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos