Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Alphard Vellfire
  6. : How to replace the cabin filter in Toyota Alphard?

Toyota Alphard Vellfire - Video tutorial

Model: Toyota Alphard Vellfire MK 2 - Years 2008-2015
Part: Cabin air filter
Operation: How to replace the cabin filter in Toyota Alphard?

Replacing the cabin filter of the Toyota Alphard is an extremely simple and fast operation, let's see how to proceed in this tutorial. First of all, let's go to the passenger seat, then open the glovebox drawer, squeeze the two walls inwards and disengage it from the dashboard. Once this is done, we identify the long rectangular door, open it by unlocking the respective clip and extract the old filter. Finally, we assemble the spare part after having cleaned the inside of the housing and making sure to respect its direction, usually marked along the edge of the same.


Posted on 25 August 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos