Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Aurion
  6. : How to change the gearbox oil of the Toyota Aurion?

Toyota Aurion - Video tutorial

Model: Toyota Aurion Xv50 - Years 2011-2017
Part: Gear oil
Operation: How to change the gearbox oil of the Toyota Aurion?

To be able to change the Toyota Aurion gear oil, you have to lift the car by loosening and removing the front wheels, in order to have access to the lower part of the engine compartment. After the wheels have been removed, it is possible to loosen the screws that secure the casing located in the lower part of the gearbox: in this way, all the used oil can be collected in a suitably positioned container. Therefore, on the left front wheel arch side, it will be possible to top up by inserting the necessary amount of oil from the breather in this position.


Posted on 7 September 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos