Do it yourself
Frequently asked questions about cars and motorcycles

Change the oil of the Toyota RAV4 MK3 gearbox.

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Transmission fluid

In this video, we see how to change the transmission oil of the Toyota RAV4 in the MK3 version: first of all, we will need some excellent transmission fluid that we can easily get on any e-commerce website. First, we will have to drain the old fluid into a container and then dispose of it at an authorized center. From the top, we will slowly add the fluid until we see clean fluid coming out from the bottom. At that point, we can put the cap back on the bottom, without tightening it too much and cleaning it well. Add 3.8 liters of fluid, always adding it slowly. Start the engine and shift through each gear for at least ten seconds. Check the level and the job is done.

Posted on 13 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Toyota Rav 4 (2006-2013 / MK 3, Xa30) In this tutorial, you will see how to change the rear differential oil in the Toyota RAV4, a very simple and quick operation. First, lift the car on …
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In this video tutorial, you will learn how to remove and replace the oil filter of a Toyota Rav4 while also replacing the engine oil. First, open the…
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Today we will see how to reset the oil change on a 2010 Toyota RAV4. So, let's start the procedure by turning on the vehicle's ignition without start…

Other guides you may be interested in

    Frequently Asked Questions

    • Rav 4 2019-2026 - How much oil does the Toyota RAV4 automatic transmission contain? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos