Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Oil on the Toyota Rav 4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Transmission fluid

See other generations:
Video tutorial

In this video tutorial, you will learn how to replace the transmission oil on the Toyota Rav 4 by following these simple and quick steps. First, lift the vehicle and drain the transmission oil by unscrewing the drain bolt located on the gearbox (using an Allen key); allow the oil to drain into a container for about ten minutes.

At this point, unscrew the filler plug and top up with the correct new transmission oil (in this case, use SAE 80W90 gear oil).


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to Dismantle the Gear Lever of the Toyota Rav 4?
How to Dismantle the Gear Lever of the Toyota Rav 4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To dismantle the gear lever of the Toyota Rav 4, detach the side plastics that wrap around the centre tunnel to release the clips of the cover around…
How to Remove the Gear Knob on Toyota RAV 4
How to Remove the Gear Knob on Toyota RAV 4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Is the gear knob on your Toyota RAV 4 damaged? Here’s how to replace it inside the car. Take the knob in your hands and turn it to the left until you…
How to Replace the Gear Knob on a Toyota RAV 4
How to Replace the Gear Knob on a Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To replace the gear knob on a Toyota RAV 4, lower the leather gaiter completely located under the knob: once the leather covering is lowered, you can…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos