Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in a Toyota Highlander?

Model: Toyota Highlander Xu40 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Antifreeze coolant

See other generations:
Video tutorial

To replace the coolant in a Toyota Highlander, access the underside of the car to remove the bolts securing the protective panel underneath. After removing this panel, you can open the drain plug of the coolant reservoir: position a container underneath to collect the old coolant and close the reservoir once it has fully drained.

After removal, open the bonnet and unscrew the cap of the reservoir, refill it, and close the bonnet.


Updated on 13 June 2026 by ScegliAuto


Related tutorials

Where is the fuse box located in the interior of the Toyota Highlander?
Where is the fuse box located in the interior of the Toyota Highlander?
Toyota Highlander (2001-2007 / Xu20) If you are looking for the fuse box of the first generation Toyota Highlander, just follow the guide below. First, get into the car and make sure it …
How to Reset the Tyre Light on a 2016 Toyota Highlander
How to Reset the Tyre Light on a 2016 Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) If you own a 2016 Toyota Highlander and want to know how to manually reset the tyre light, simply follow the steps described below and put them into …
How to Reset the Pressure Warning Light on Toyota Highlander
How to Reset the Pressure Warning Light on Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) In this video tutorial, you can see how to reset the warning light on a Toyota Highlander, following a few simple steps that will guide you towards p…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos