Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Pressure Warning Light on Toyota Highlander

Model: Toyota Highlander Xu50 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

In this video tutorial, you can see how to reset the warning light on a Toyota Highlander, following a few simple steps that will guide you towards proper vehicle management. First, check the tyre pressures of your Toyota Highlander using a gauge, adhering to the values on the label inside the driver's door.

After inflating the tyres, restart the engine and at this point, the warning light should disappear or turn off after a few moments. If this does not happen, proceed as follows: press and hold the reset button for the tyre pressure (!) on your Toyota Highlander until you see a message on the vehicle's display confirming that the reset has been successfully completed (this usually takes a few moments).

Now, turn off the engine and restart your Toyota Highlander to see if the tyre pressure warning light has turned off.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Toyota Highlander
How to Reset the Tyre Pressure Light on a Toyota Highlander
Toyota Highlander (2008-2013 / Xu40) Resetting the tyre pressure light or TPMS light on a Toyota Highlander is straightforward to do independently. The first step is to get into the vehi…
Tyre Pressure Reset on a Toyota Highlander
Tyre Pressure Reset on a Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) In this guide, you will see how to reset the tyre pressure warning light on a Toyota Highlander, model produced from 2014 to 2019, in just a few simp…
Resetting the TPMS light on the Toyota Highlander
Resetting the TPMS light on the Toyota Highlander
Toyota Highlander (2020-2026 / Xu70) Today's instructions will allow us to reset the TPMS light on the Toyota Highlander; before resetting the tire pressure light, it is necessary that a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos