Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Engine Oil Light on the Toyota Rav 4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Service warning light

This brief and simple guide outlines the steps necessary to reset the engine oil service light on the Toyota Rav 4. First, get in the vehicle and turn on the ignition; then press the DISP button until you reach the Trip A display on the instrument cluster. At this point, turn off the ignition, hold down the DISP button, and turn the ignition back on; you will see the service reset procedure begin, thus resetting the engine oil light on the instrument cluster of your car!

Updated on 14 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Resetting the engine oil change indicator light of the Toyota RAV 4.
Resetting the engine oil change indicator light of the Toyota RAV 4.
Toyota Rav 4 (2006-2013 / MK 3, Xa30) These brief instructions will show us how to reset the maintenance light for the oil change of the Toyota RAV 4. First, we get into the car and start…
Resetting the service light on the Toyota RAV 4.
Resetting the service light on the Toyota RAV 4.
Toyota Rav 4 (2019-2026 / Xa50, MK 5) Today we will see the procedure that will allow us to reset the service light for the regular maintenance of the engine oil change for the Toyota RAV…
How to reset the oil light on the Toyota Rav 4
How to reset the oil light on the Toyota Rav 4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) The steps to reset the oil warning light or the service light on a Toyota Rav 4 are as follows: The first step is to turn on the instrument panel by …

Other guides you may be interested in

    Frequently Asked Questions

    • Rav 4 2000-2006 - What does the oil light of the Toyota RAV4 indicate? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos