Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the engine oil warning light on the Toyota RAV 4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

Through these brief instructions, you will learn how to reset the maintenance warning light for the engine oil change on the Toyota RAV 4. First, get into the vehicle and turn on the instrument panel; then navigate to the settings menu of the onboard computer until you reach the vehicle settings option.

At this point, scroll through the submenu items until you reach the service option, confirming and then executing the reset of the oil change warning light; this will permanently reset the maintenance key from the instrument panel!


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Warning Light on a 2018 Toyota RAV4
How to Reset the Oil Warning Light on a 2018 Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) If you have just performed an engine oil change and replaced the oil filter on your 2018 Toyota RAV4 but the warning light continues to illuminate, d…
How to reset the Service light on the Toyota RAV 4?
How to reset the Service light on the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) To reset the Service light on the Toyota RAV 4, turn the key to switch on the instrument cluster. This will allow you to navigate through the menu th…
How to Reset the Tyre Pressure Warning Light on the Toyota RAV 4?
How to Reset the Tyre Pressure Warning Light on the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) To reset the tyre pressure warning light on the Toyota RAV 4, first inflate the car tyres to the correct pressure value, which is indicated on the st…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos