Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Toyota Aygo

Model: Toyota Aygo Ab40, MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

The first thing you must do if the tyre pressure light comes on is to go to a petrol station or a tyre shop to check the cause of the tyre deflation. Once the problem is resolved and the tyre pressure is restored, you can reset the light; the pressure button is located in the glove compartment.

If you open the drawer, you will see a button marked "SET"; press and hold this button until the reset operation is complete. If you have previously resolved the pressure issue, the light will remain off; otherwise, if the tyres continue to lose pressure, the light will come back on.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Resetting the Tyre Pressure Warning Light on the Toyota Aygo X
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will see the main instructions that will allow you to reset the tyre pressure warning light on the Toyota Aygo X; before performing…
How to Reset the Tyre Light on a Toyota Aygo?
How to Reset the Tyre Light on a Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Tu…
How to Reset the Tyre Pressure Light on a Toyota Aygo?
How to Reset the Tyre Pressure Light on a Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) Resetting the tyre pressure light on a Toyota Aygo is an extremely simple and quick operation. Before doing this, ensure that you have restored the c…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos