Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Toyota Aygo?

Model: Toyota Aygo Ab40, MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

Resetting the tyre pressure light on a Toyota Aygo is an extremely simple and quick operation. Before doing this, ensure that you have restored the correct pressure in each tyre according to the guidelines in the manual.

Start by entering the vehicle, then insert the key and turn on the ignition. Next, open the passenger glove compartment, locate the button with the icon of the tyre pressure light, and press it. Keep the button pressed for the necessary time until the light flashes and then disappears completely.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Toyota Aygo
How to Reset the Tyre Pressure Light on a Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) Before you begin, ensure that the tyre pressures on your Toyota Aygo are correct, and then sit in the driver's seat. Start by activating the instrume…
How to Reset the Tyre Light in a Toyota Aygo X?
How to Reset the Tyre Light in a Toyota Aygo X?
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this tutorial, see how to reset the tyre light in a Toyota Aygo X, a very simple and quick operation, to be performed only after restoring the cor…
How to Reset the Tyre Light on a Toyota Aygo?
How to Reset the Tyre Light on a Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Tu…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos