Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Toyota Camry

Model: Toyota Camry Xv30 - Years: 2002, 2003, 2004, 2005, 2006
Part: Starter motor

See other generations:
Video tutorial

In this video tutorial, you will learn how to replace the starter motor on a Toyota Camry, model years 2002 to 2006. Start by opening the hood and removing the vehicle's battery and its tray. Next, remove the air filter box and its intake hose.

Once this is done, you will have access to the starter motor. To remove it, first disconnect its connector and the nut under the rubber cover using a 12mm wrench.

Now, remove the two bolts that hold the starter in place with a 14mm wrench. You can now take it out and replace it with a new one by following the procedure in reverse.


Updated on 21 June 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor on a Toyota Camry
How to Replace the Starter Motor on a Toyota Camry
Toyota Camry (2006-2013 / Xv40) Today, you will learn how to remove and replace the starter motor on a Toyota Camry in simple and quick steps. First, open the hood and start by remo…
How to Replace the Starter Motor on a Toyota Camry?
How to Replace the Starter Motor on a Toyota Camry?
Toyota Camry (1991-1996 / Xv10) To replace the starter motor on a Toyota Camry, start by disconnecting the negative battery cable to avoid electric shocks. Locate the starter motor,…
How to Replace the Window Regulator Motor on a Toyota Camry
How to Replace the Window Regulator Motor on a Toyota Camry
Toyota Camry (1997-2001 / Xv20) This guide outlines the steps to remove and replace the window regulator motor on a Toyota Camry by following these simple steps. First, open the fro…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos