Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Battery of the Toyota C-HR

Model: Toyota C Hr Ax50, MK 1, Ax10 - Years 2016-2023
Part: Battery

If the battery of your vehicle has reached the end of its life cycle, it needs to be replaced. Here’s how to do it: first, open the bonnet and locate the battery, which is on the left side of the engine bay. Remove the negative terminal with a spanner and then the positive terminal. Next, locate the fixing screws at the base of the battery and remove them. Then, extract the battery from its housing. Take the new battery and position it on the support tray, refit the fixing screws, and connect the positive terminal first and then the negative terminal.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyres on a Toyota C-HR
How to Reset the Tyres on a Toyota C-HR
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) The video demonstrates how to reset the tyre pressure on a Toyota C-HR. The first step is to ensure the car is stationary, not in motion. Navigate th…
Replacing Number Plate Bulb on Toyota CHR
Replacing Number Plate Bulb on Toyota CHR
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) Replacing the number plate bulbs on the Toyota CHR is very simple: the bulb holders are located in the strip just above the number plate itself, belo…
How to Replace the Remote Battery of a Toyota CHR?
How to Replace the Remote Battery of a Toyota CHR?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) This short video tutorial shows how to change the battery of the key remote for a Toyota CHR. The operation is very simple and requires no tools. Tak…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos