Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Seatbelt on the Toyota Land Cruiser

Model: Toyota Land Cruiser J90, MK 8 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002

See other generations:
Video tutorial

If you want to replace the seatbelt on your vehicle, complete with pretensioner and retractor, you can follow the instructions provided in this video and the description below. To access the seatbelt pretensioner, you need to remove the side panel and the scuff plate, then unscrew the fastening screws of the seatbelt base near the floor.

Next, remove the fastening screws of the upper seatbelt anchor. Then take the new pretensioner and position it in the housing, disconnect the connector of the inertia sensor and reconnect it to the new one, and finally, proceed to refit the fastening screws of the upper and lower anchors.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

Where is the fuse box located in the Toyota Land Cruiser J120?
Where is the fuse box located in the Toyota Land Cruiser J120?
Toyota Land Cruiser (2002-2009 / MK 10, J120) To locate the box containing all the fuses of your Toyota Land Cruiser j120, you must follow the steps described in our new guide addressed to you. F…
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Toyota Land Cruiser (1990-1997 / MK 7, J80) To access the cabin fuse box in your Toyota Land Cruiser J80, follow the steps outlined below. Before starting, ensure the vehicle is parked on a fla…
How to Replace the Cabin Filter in the Toyota Land Cruiser?
How to Replace the Cabin Filter in the Toyota Land Cruiser?
Toyota Land Cruiser (2002-2009 / MK 10, J120) Replacing the cabin filter in the Toyota Land Cruiser, as we can see in this tutorial, is an extremely simple and quick operation. First, sit in the …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos