Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light in the Toyota Auris

Model: Toyota Auris E180 - Years 2012-2018
Part: Tire pressure warning light

To reset the tyre pressure warning light on the dashboard of the Toyota Auris, first turn on the ignition by turning the key. Once the dashboard is powered, open the glove compartment on the passenger side and locate the reset button for the warning light on its left side. Press and hold this button for a few seconds until the light starts to flash. After a few seconds, the light will stop flashing and turn off completely, confirming that the reset has been successful.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Toyota Auris?
How to reset the tyre pressure warning light on the Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the tyre pressure warning light on the Toyota Auris, turn on the instrument panel after all tyres have been inflated to the correct pressure…
How to Reset the Tyre Pressure Light on a Toyota Auris?
How to Reset the Tyre Pressure Light on a Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the tyre pressure light on the Toyota Auris, inflate the tyres to the recommended pressure value, which is indicated on the sticker affixed …
How to reset the tyre pressure warning light on the Toyota Auris?
How to reset the tyre pressure warning light on the Toyota Auris?
Toyota Auris (2018-2024 / E210) To reset the tyre pressure warning light on the Toyota Auris, you need to turn on the ignition so that you can see the corresponding light is active;…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos