Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Toyota Auris?

Model: Toyota Auris E180 - Years 2012-2018
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Toyota Auris, turn the ignition on without starting the engine. Next, open the glove compartment located on the passenger side: on the right side of the glove compartment, there will be a button with the symbol for low tyre pressure and the word SET. Press and hold the button for a few seconds: this will cause the light to flash three times until it is completely off. To verify the reset of the light, you can turn the ignition off and then back on.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Light on a Toyota Auris 2
How to Reset the Tyre Light on a Toyota Auris 2
Toyota Auris (2012-2018 / E180) If you own a second-generation Toyota Auris and need to manually reset the tyre light, simply follow the instructions in this new guide and apply the…
How to Reset the Tyre Pressure Light on a Toyota Auris?
How to Reset the Tyre Pressure Light on a Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the tyre pressure light on the Toyota Auris, inflate the tyres to the recommended pressure value, which is indicated on the sticker affixed …
How to reset the tyre pressure warning light on the Toyota Auris?
How to reset the tyre pressure warning light on the Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the tyre pressure warning light on the Toyota Auris, turn on the instrument panel after all tyres have been inflated to the correct pressure…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos