Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Toyota RAV4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

Do you need to replace the battery on this model of car? You will find the instructions and operational procedures to follow in the description below and also in the video. After opening the bonnet, locate the battery on the right side just below the windscreen.

To remove it, you must take off the plastic panel located just below the windscreen by unclipping the fastening clips. After removing the panel, using a spanner, unscrew the fastening screws of the upper cross member.

Next, disconnect the negative terminal first and then the positive one, after which you can remove the battery from the compartment and position the new one, then reconnect the positive terminal first and then the negative one, and finally reattach the support screws of the bracket.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Toyota RAV4?
How to Replace the Battery in a Toyota RAV4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To replace the battery in a Toyota RAV4, open the bonnet to access the engine bay and remove the front grille by loosening the appropriate fixing scr…
How to change the battery of the Toyota RAV4 key.
How to change the battery of the Toyota RAV4 key.
Toyota Rav 4 (2000-2006 / MK 2, Xa20) In this guide aimed at all of you who own a Toyota RAV4, we will help you complete the procedure to replace the battery inside the key. First of all,…
How to Replace the Battery in a 2017 Toyota RAV4
How to Replace the Battery in a 2017 Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this new mini guide dedicated to your 2017 Toyota RAV4, discover how to correctly replace the battery. As this is a potentially hazardous componen…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos