Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a 2009 Toyota Sienna

Model: Toyota Sienna Xl20 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Warning light – error code

See other generations:
Video tutorial

The procedure to reset the maintenance light on your 2009 first series Toyota Sienna is very simple and takes only a few seconds to perform correctly. Just follow these steps one by one. First, insert the key and turn on the instrument cluster.

Next, ensure that the display shows "ODO" and turn off the cluster. Now, press and hold the "Trip/ODO" button located on the lower left side of the cluster while simultaneously turning the cluster on. Once the reset is complete, release the button, and you're done.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

How to Reset the Engine Oil Light on a Toyota Sienna
How to Reset the Engine Oil Light on a Toyota Sienna
Toyota Sienna (2010-2020 / Xl30) To reset the engine oil light on a 2011 Toyota Sienna, sit in the driver's seat and insert the key into the ignition. Turn the ignition to the ON pos…
How to replace the key battery in the Toyota Sienna?
How to replace the key battery in the Toyota Sienna?
Toyota Sienna (2004-2010 / Xl20) If you own a Toyota Sienna and want to learn how to correctly replace the key battery, simply follow the steps outlined below. First, obtain a flat s…
How to replace the battery in the remote control of the 2021 Toyota Sienna.
How to replace the battery in the remote control of the 2021 Toyota Sienna.
Toyota Sienna (2021-2026 / Xl40) To correctly replace the battery inside the key of your 2021 Toyota Sienna, simply follow the steps outlined in this new guide. First, purchase a new…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos