Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Light on a Toyota Sienna

Model: Toyota Sienna Xl30 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Service warning light

See other generations:
Video tutorial

To reset the engine oil light on a 2011 Toyota Sienna, sit in the driver's seat and insert the key into the ignition. Turn the ignition to the ON position without starting the engine.

Using the button on the instrument panel, select the ODO mode (total odometer) and not Trip A or Trip B. Then turn off the ignition. Press and hold the same odometer button and, while holding it, turn the key back to the ON position.

Continue to hold the button for a few seconds until a series of dashes appear on the display, disappearing progressively. When the counter resets completely, release the button.

Turn the ignition off and back on to check that the oil maintenance light has been reset correctly.


Posted on 6 March 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Toyota Sienna
How to Reset the Tyre Pressure Light on a Toyota Sienna
Toyota Sienna (2010-2020 / Xl30) This brief video tutorial shows how to reset the tyre pressure light on a Toyota Sienna, model produced from 2010 to 2020. First, turn on the vehicle…
How to replace the battery in the remote control of the 2021 Toyota Sienna.
How to replace the battery in the remote control of the 2021 Toyota Sienna.
Toyota Sienna (2021-2026 / Xl40) To correctly replace the battery inside the key of your 2021 Toyota Sienna, simply follow the steps outlined in this new guide. First, purchase a new…
How to Reset the Maintenance Light on a Toyota Sienna
How to Reset the Maintenance Light on a Toyota Sienna
Toyota Sienna (2010-2020 / Xl30) The video shows how to reset the service light on a Toyota Sienna produced from 2017 to 2019. The service light comes on when it is time for maintena…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos