Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a Toyota Sienna

Model: Toyota Sienna Xl30 - Years 2010-2020
Part: Warning light – error code

The video shows how to reset the service light on a Toyota Sienna produced from 2017 to 2019. The service light comes on when it is time for maintenance; of course, after performing the necessary operations, you can proceed to reset it. The operation requires very simple steps; first, turn on the instrument panel without starting the engine. At this point, locate and press the ODO/TRIP button near the speedometer. The next step is to turn off the instrument panel and then start the car while continuing to hold the button for at least 5 seconds until the display shows the maintenance data reset message, along with the reset indication on the display.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the 2017 Toyota Sienna
How to reset the oil light on the 2017 Toyota Sienna
Toyota Sienna (2010-2020 / Xl30) To manually reset the oil light on your 2017 Toyota Sienna, simply follow the steps described below. First, get into the car and turn on the instrume…
How to reset the service light on a 2014 Toyota Sienna
How to reset the service light on a 2014 Toyota Sienna
Toyota Sienna (2010-2020 / Xl30) Today we will explain how to reset the maintenance light on a 2014 Toyota Sienna vehicle. To reset the light, we need to turn on the instrument panel…
How to reset the tire pressure light in the Toyota Sienna?
How to reset the tire pressure light in the Toyota Sienna?
Toyota Sienna (2010-2020 / Xl30) In this tutorial we can see how to reset the tire pressure light in the Toyota Sienna, an extremely simple and quick operation, to be performed only …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos