Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Sienna
    4. : To reset the maintenance light on a 2008 Toyota Sienna.

Toyota Sienna - Video tutorial

Model: Toyota Sienna Xl20 - Years 2004-2010
Part: Instrument cluster
Operation: To reset the maintenance light on a 2008 Toyota Sienna.

If you want to manually reset the maintenance light that appears on the instrument panel of your first-generation Toyota Sienna (year 2008), just follow these simple steps. First, park the car safely and make sure that the display on the instrument panel shows the total kilometers driven. Then, turn off the ignition and press and hold the "ODO/Trip" button located on the lower left side of the dashboard. At the same time, turn on the ignition and wait for the maintenance light reset to complete.


Posted on 4 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos