Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Door Bulb of the Toyota Highlander with a LED.

Model: Toyota Highlander Xu40 - Years: 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

To install LED lights in the doors of the Toyota Highlander: simply remove the existing ones, easily pulling them out of their housing, where they are only held by pressure. Disconnect the connector.

You now have the light in hand, from which you can remove the transparent part, held in its housing by just five clips. Remove the standard bulb and insert the LED one. Remember - contrary to what some YouTubers say - that LED bulbs should never be touched with bare hands.

Use gloves. Place it back in its housing, reattach the transparent part, reconnect the connector, and put it back in its place in the door.

Do the same in the other door. Job done.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Replace the Dipped Beam Bulb in a Toyota Highlander?
How to Replace the Dipped Beam Bulb in a Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) This video demonstrates how to replace the dipped beam bulb in a Toyota Highlander. It is a simple and quick operation, and it is recommended to use …
How to Replace the Interior Lights in a Toyota Highlander?
How to Replace the Interior Lights in a Toyota Highlander?
Toyota Highlander (2001-2007 / Xu20) One of the bulbs providing light to the interior has blown, or you simply want to replace the old traditional bulbs with new LED ones? No problem. Wi…
How to Remove the Front Door Panel on Toyota Highlander
How to Remove the Front Door Panel on Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) In this brief guide, find instructions for removing the front door panel on a Toyota Highlander. First, open the front door of the vehicle and begin …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos